All of the same techniques we use in the industry standard 1" blade now come in the 7/8" diamter size for those smaller sized sabers. 7/8" blades are a great alternative to the 'whipy' 3/4" diameter blades that have been used in compact sabers in the past. If you have a saber that requires a 7/8" blade, now you can get the best in the business!
*NOTE: We do NOT glue our blade diffusion film to the blade. Please be careful when removing the dust cap, and when removing the blade from your saber not to allow the film to fall out. When we first entered this industry, we had noticed several of our competitors glued the film into their blades and had creasing/krinkling of the film right at the point where the blade flexes the most. Saber blades flex, even when just swinging or spinning around. If you keep the film stationary and the blade flexes, the film will crease. Not gluing the film in allows the film to spiral in on itself and flex with the blade. When we developed our blades, we chose not to glue our film in and it turned out that the film will last much longer without creasing. After many hundreds of blades, we can say that this method allows for a long lasting, even blade. We have blades in the house that have seen years of use with no creasing. The only thing is, you have to take care when removing the blade not to let the film drop out and use your included dust cap to keep dust out, and the film in.
31 Reviews Hide Reviews Show Reviews
I am so happy with this blade. The color distribution throughout the whole blade exceeded my expectations. The shine through bullet tip looks awesome. No need to look anywhere else for a lightsaber blade, you have found what you are looking for. I won't use any other blade again.
This is my fourth lightsaber blade I've purchased from Vader's Vault. I'm always satisfied with their products and they have responsive customer service.
The 7/8" blade is a must if you want your saber to have a more, classic trilogy or SW Rebels feel to it. I wish I could post a pick of this in my Vader hilt, because it seriously looks so much better than it did with a 1" blade in it. The conversion to fit a 7/8" blade into 1" hilt is very easy to do as well. You just take a piece of 1" thin walled blade stock, cut it to the length of your emitter socket and the 7/8" fits right in nice and snug. Vader's Vault, seriously, you guys out did yourselves on this one, props to you.
Great for thin neck sabers and they are nice enough to cut the reflective film to the right length.
We do not offer returns on our products as they are handcrafted to order and made specifically for each customer. Should there be an issue with the products function and it is covered under our warranty , we will be glad to service or replace the product at our discretion. In the event that we accidentally ship you the wrong item, of course we will take care of getting you the item you ordered and take care of all shipping charges incurred in making it right.
We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.
All Vader's Vault products valued at $100 or greater will be automatically insured. This means that all 'Sabers' sold here will be insured automatically. Trust us, if you ever need it, you'll be glad you had it, and so will we. The last thing we want to do is eat something because the shipping carrier lost or damaged it, and we're pretty sure you, as the customer, don't want to be out any money.